Poretech

Innova BET Sorptometer Model: iBET 200 Series

  • Analysis stations: 4-Station and 6-Station, fully automated operate
  • Surface Area and Pore Size by Gas Sorption
  • Adsorption / Desorption isotherm
  • Specific surface area: BET, Langmuir
  • Meso pore size distribution: BJH, Dollimore-Heal
  • Micropore area and volume: Dubinin-Radushkevich, t-Plot method
  • Micropore distribution: MP, HK, SF, DA, and compatible with NLDFT (Option)
  • Total pore volume and average pore width
  • Auto Degassing: full-automatic, program control degassing system
  • Built-in 3 touch PAD for both instrument control / Analysis and data reduction in real time. Remote control and service-after-sales may be performed with a dedicated mobile APP option.
  • The latest patented Constant Void Volume Technology: The servo-feedback elevator plus a 1000 torr transducer accurately controls the coolant level to keep the void volume constant despite of the coolant
  • Fully automated constant temperature system: The dual gas input preheating with 0.02 ℃ high-precision thermistor system, controls the temperature between 35-50 ℃ with real-time display of the temperature of the gas pipe and the manifold against errors caused by environmental factors.
  • PFC flow control valves: System evacuation is performed by a pre-set program; the evacuation rate may be adjustable to prevent powder intake into the system during initial evacuation and to increase the pumping rate as the system approaches higher
  • 32-bit digital electronics: The latest 32-bit chips and circuit boards were developed instead of typical 24-bit system, which lead that the precision of the transducers is superior to competitive units, and ensure the ultimate accuracy for characterizing samples by nitrogen adsorption with micropore or ultra-low surface area less 2 m²/g.
  • iBET-201A owns 1 mesopore/micropore samples ports with degassing additional six samples simultaneously by dedicated degassing station. The system is suitable to universities, research institutions and industrial R&D with analysis of surface area and pore size of super-microporous, or micro- and mesoporous Chemisorption is available.

 

 

Model iBET-201A-MP iBET-204A iBET-206A
Analysis ports 1 4 6
1000 Torr Transducer 5 6 8
Electronic Signal (ADC) 32 bits
P0 Port 1
Constant void volume system Build-in
Repeatability 0.1% (Based on RM)
Surface area range 0.005m2/g upto no upper limit
Pore size range 3.5Å ~ 5000Å 12Å ~ 4000Å
P/P0 range 5×10-10 to 1 1×10-4 to 1
Minimum Pore volume < 0.0001ml/g 0.0001ml/g
P/P0 pressure resolution 1×10-10
Accuracy of Transducer ±0.1% FS ±0.1%
LN2 uninterrupted time Upto 72 hrs Upto 32 hrs
Vacuum pump ability 1×10-12 mmHg 2×10-3 mmHg
Adsorbates N2, Ar, CO2, Kr, any non-corrosive gas
Degassing system 3 ports degas station 6 ports degas station
  • Achieve best accuracy for ultra-low surface area and pore size by nitrogen adsorption.
  • Repeatability of conventional samples is better than 0.1%
  • Long-term stability for low surface area analysis is better than 1%
  • Breaking through the traditional “mesopore used instrument” and making micropore analysis by N₂ successful.

Not sure which Instrument fits your requirements?

Please do not hesitate to contact us, and send us your samples for our comprehensive testing and analysis.

This will allow us to identify the most suitable instrument for your requirements.